2X 10 INCH FLARED PORTS 3D PRINTED PETG 200MM LONG
AU$180.00
10-inch FLARED PORTS 3D PRINTED PETG
Designed to fit over 10inch (280MM)Stormwater Pipe. flare overhung IS 12INCHES TOTAL PORT SIZE
What You Get-
1x Front-facing flared Port (To fit over Stormwater pipe)
1x Rear-facing flared Port (To fit over Stormwater pipe)
Note: Confirm Measurements Diameter internal and External in "Options"
1 color or request for multi-color layers in "Options" Free
About-
Our 10-inch Flared, Ports are perfect for car audio enthusiasts looking for a unique and eye-catching aesthetic. These ports are 3D printed with PETG filaments and feature a 4mm wall and a 90% infill for superior strength and stability.
Get your car audio system looking and sounding better than ever
Note-
3D Printing is manufactured in layers when produced.
These layers are visible and can be left as is or as an alternative for a super smooth finish.
-PETG is much better to sand than PLA. Using grid sandpaper from 800 steps up to 1500 Grid will make the surface smooth.
100% Full Refund Guarantee -
As 3D Printing is new to Car Audio we are still exploring new materials to print with.
Should anything happen to the port by warp from heat a full refund or a new port will be sent out to you and redesigned for your environment.
Part of growing 3D car audio is learning from our mistakes and making them better for the next time. So feel 100% confident in your investment when buying anything from 3D Car Audio
Manufacturing Time Frame: 7 to 14 days:
Each Port is Printed by Order with fresh new Filaments out of the box
FOR CUSTOM ORDERS https://www.audiocarworld.com/customports
Visit us- Keep up to date with our latest products
-YouTube https://www.youtube.com/@3DCARAUDIO
Subscribe & hit the Bell
-Facebook https://www.facebook.com/AudioCarWorld/
Like and Follow
Like and Follow
Color
Size
Filaments
Confirm Measurements Diameter internal and External (optional)
Multi Color layers (optional)
How Durable are they?
Question: From FB Group
How durable are they? Will they deform with 120+ Fahrenheit temps inside cars? Genuine question, not talking trash. Had a couple 3d printed bass knobs and accessories that melted just sitting in the car?
Response:
Very Fair question buddy. So, the thickness of the walls and design model application should determine the filament to use in the environment for 3D Printing. PLA is Great and even more tolerant to heat than Perspex over 160 deg. but at 3MM walls with structures of the same sort as in my other ports, you will see Fins or Buttresses to support walls. if you print PLA less than that it will deform at 80 Deg without infill or a solid 3mm print. So for the 10 inch I Print out I recommend PETG as a min. at 4mm walls with 90% infill similar to PVC ior you can order in ABS and ACA which have better properties than PVC. Example 10inch PETG is $110 to keep it economical or ABS jumps up to $170. As for the accessories melting could have just been walls were too thin matirials not right or model not design for environment when printing even PVC will melt at a 1 to 2-mm thick wall. Thus we have abs asa.. Besides, should anything like that happen full refunds, man. It is all part of learning the 3D Printing world Certainly we take things like that on board and learn from it. it does not mean we give up on 3D printing it means what to do right the next time. I have attached some pods I made for my Sprinter years ago in PETG with 3mm walls these are exposed to sun all day and still going well. all in the design model,
